Home / Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission - 415 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission - 415 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission - 415 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission - 415 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission - 415 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission - 415 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected

Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission - 415 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected

Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Description: 

    • Horsepower & Torque: 415 Horsepower / 415 ft. lbs. Torque
    • Compression Ratio: 10.0:1
    • Aluminum Heads
    • Hydraulic Roller Cam
    • Cast Crank
    • Forged Pistons

    Block:

    • BluePrint Engines High Strength Cast Iron block
    • Increased Deck Thickness and Strength Webbing
    • Priority Main Oiling
    • 4.000" Bore
    • 4-Bolt Main
    • 1-Piece Rear Main Seal
    • Improved Water Jacket Design

    Rotating Assembly:

    • BluePrint Cast Crankshaft
    • 3.400" Stroke
    • Forged I-Beam 5.400" Connecting Rods
    • Forged Pistons
    • 28oz Externally Balanced Front and Rear

    Cylinder Heads:

    • BluePrint Aluminum Cylinder Heads - HP9009
    • 60cc Chamber
    • 2.02" Intake / 1.60" Exhaust Valves
    • 190cc Intake / 65cc Exhaust Runners

    Cam Specs:

    • Hydraulic Roller
    • .543 Intake / .554 Exhaust Lift
    • 218 Intake / 226 Exhaust Duration
    • @.050-112 Degree Lobe Separation

    Ignition Timing:

    • 34 Degrees Total at 3500 RPM

    Also Includes:

    • Dual Plane, Satin Aluminum Intake Manifold
    • Holley Sniper 2 EFI System
    • Pro Billet Distributor
    • Mustang Style Valve Covers
    • 7 Quart Oil Pan
    • Dyno Tested and Shipped with Results
    • EFI Fuel Pump Kit
    • Front Accessory Drive with A/C Compressor, Power Steering, Alternator, and Water Pump

    Assembled with Complete 4R70W Automatic Transmission Package:

    • Includes Electronic Transmission Controller
    • Transmission Built to 650 HP
    • 2200-2600 Stall Torque Converter
    • Flex Plate
    • Starter
    • TPS Harness Included for Integration with Transmission Controller and EFI.
    • 4 Speed, Overdrive Transmission w/Lockup
    • GEAR RATIOS
      • First: 2.84 :1.
      • Second: 1.55 :1.
      • Third: 1.00 :1.
      • Overdrive: 0.70 :1.
      • Reverse: 2.32 :1.

    Notes:

    • Note that 4R70W transmission may require modifications/replacement of driveshaft, transmission mount, exhaust routing, etc. 
    • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
    • Package Ships assembled as pictured. 
    • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE, STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT OR VISIT FACTORYFIVEENGINES.COM
  • Customer Reviews
    No comments